 |
Minolta Hi-Matic F Rangefinder Adjustment Tips and Tricks
Posted by Bengt Köhler Sandberg 2013-12-05  But you do need to completely remove the cameras top in order to do this.
Removing film rewind knob and the film advance lever.
 These screws must
be removed.
 There are also four
screws holding the hot shoe.
 You can now start to
adjust the rangefinder and the screw that do this are
located under the hot shoe.
 There are three screw to
use here.
Nr 1: This is what locks the rangefinder settings in place. So you need to slightly loose this before you change any other. Nr: 2 Horizontal adjustment Nr: 3 Vertical adjustment And when you're done you tighten the Nr 1 screw.  And then it's all done and you only need to put it back together again. Related posts about rangefinder adjustments: - Tips when you adjust your Rangefinder - Minolta Hi-Matic F & FP Want
to help me out?
Make my site known by sharing it with your friends and family. This helps and would be really appreciated, thanks!
My facebook page
|
 |